Showing 211–225 of 253 results

Erichsen MODELL 435 Best.-Nr. 0096.01.31 Schmissbeständigkeitsprüfer nach Oesterle einschl. 3 Prüfscheiben (Duroplast, Kupfer, Stahl), 3 Belastungs- federn und Kunststoffkoffer

Best.-Nr. 0096.01.31 Schmissbeständigkeitsprüfer nach Oesterle einschl. 3 Prüfscheiben (Duroplast, Kupfer, Stahl), 3 Belastungs- federn und Kunststoffkoffer

Erichsen MULTI CUTTING DEVICE 295 / I with 6 blades and cutting distance 1 mm for cross-cut tests according to EN ISO, ISO, VDA, EN, with magnifier, Polyamide bristle brush and plastic case

with 6 blades and cutting distance 1 mm for cross-cut tests according to EN ISO, ISO, VDA, EN, with magnifier, Polyamide bristle brush and plastic case

Erichsen NASSSCHICHTDICKENMESSER 433 ISO 2808, BS 3900:C5 4 Teilmessbereiche: 5 – 100 μm ( 5 μm Skalenteilung) 100 – 300 μm (10 μm Skalenteilung) 300 – 700 μm (20 μm Skalenteilung) 700 – 1500 μm (40 μm Skalenteilung

ISO 2808, BS 3900:C5 4 Teilmessbereiche: 5 - 100 μm ( 5 μm Skalenteilung) 100 - 300 μm (10 μm Skalenteilung) 300 - 700 μm (20 μm Skalenteilung) 700 - 1500 μm (40 μm Skalenteilung

Erichsen ORDER CODE: 0218.01.32 Probe

Diamond probe according to DIN EN 438-2 and ISO 4586-2 (Cone angle 90 °, tip radius 90 microns)

Erichsen ORDER NO. 0004.01.31 SHEET METAL TESTING MACHINE, MODEL 100 with manual operation, maximum drawing force 30 kN and compliance with the standard constant adjustable blank holder pressure max. 10 kN, with Tiefungsanzeige by counter with 0.1 mm Reading accuracy as well as a testing tool no. 27 by EN ISO 20482; for checking the drawability of sheet metal and bands from 0.1 to 1.5 mm thick (about 400 N / mm² tensile strength) in widths from 13 to 90 mm, by the Erichsen cupping test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE. Weight: approx 36 kg net Dimensions: 340 x 350 x 450 mm (L x W x H)

with manual operation, maximum drawing force 30 kN and compliance with the standard constant adjustable blank holder pressure max. 10 kN, with Tiefungsanzeige by counter with 0.1 mm Reading accuracy as well as a testing tool no. 27 by EN ISO 20482; for checking the drawability of sheet metal and bands from 0.1 to 1.5 mm thick (about 400 N / mm² tensile strength) in widths from 13 to 90 mm, by the Erichsen cupping test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE. Weight: approx 36 kg net Dimensions: 340 x 350 x 450 mm (L x W x H)

Erichsen ORDER NO. 0012.01.31 MODEL 102 SHEET METAL TESTING MACHINE Power Supply

with electro-hydraulic drive, max. Pulling force of 60 kN and automatic test sequence with a stop at specimen failure (from 0.3 mm sheet thickness), for testing of sheet and strip any kind of pressure -, punching and deep drawing ability by means of the I. Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE, II. Bore Expanding sample (KWI) to Siebel and Pomp. The testing machine is equipped with automatic shut-off device and delay automatic execution in accordance with Technical Description 102 / D, a Cupping Tool No.. According to 27 EN ISO 20482 as well as a filling hydraulic oil equipped. Power supply: 400 V three-phase, 50 Hz, 1 kW (other voltages on request) Weight: about 280 kg net Dimensions: 650 x 680 x 1125 mm (L x W x H)

Erichsen ORDER NO. 0044.03.31 Film Applicator System Wasagasse 288 “REFERENCE CLASS” with film width 180 mm, gap heights + 150 microns 200 microns (please specify when ordering)

Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 180 mm, gap heights + 150 microns 200 microns (please specify when ordering)